How to Clean the Bottom of Clarks Desert Boots

One often overlooked aspect of cleaning Clarks Desert Boots is the bottom – an essential part that contributes to the overall appearance and longevity of the boots. 

In this guide, we’ll walk you through the steps on how to clean the bottom of Clarks Desert Boots and keep them in top-notch condition.

How to Clean the Bottom of Clarks Desert Boots

The cleaning method for the bottom of Clarks desert boots depends on the material of the sole. Here are the methods for both crepe and rubber soles:

1. Crepe sole:

Dry Brushing the sole:

  • Start brushing at the toe and gently brush toward the heel in smooth, consistent strokes. Focus on areas with visible dirt or debris buildup.
  • After brushing, tap the brush against a hard surface to remove any accumulated debris.

Opt for a brush with stiff bristles, but not harsh enough to scratch the crepe. An old toothbrush, suede brush, or crepe sole brush specifically designed for this purpose are ideal.

Suede eraser: 

For stubborn marks, use a suede eraser to gently rub them away. Use a back-and-forth motion with light pressure to rub the eraser over the marks. For best results, use the eraser on dry surface.

Using Suede Cleaner:

  • Select a reputable suede cleaner specifically formulated for crepe soles. Follow the instructions on the cleaner package. Typically, you’ll need to dilute the cleaner with water in a specific ratio.
  • Dip a clean, lint-free cloth into the diluted cleaning solution. Make sure the cloth is damp, not soaking wet.
  • Gently and carefully pat the stained area with the damp cloth, working in a circular motion. Avoid scrubbing or pressing too hard.
  • Once the stain is gone, use a clean, damp cloth to remove any soap residue. Dry the soles completely with a clean towel before wearing or storing the boots.

Before applying to the entire sole, test the solution on a small, hidden area, as you did with the eraser.

Related Article: How to Waterproof Clarks Desert Boots

2. Rubber sole:

Using Wet Cloth:

  1. Use a clean, lint-free cloth. Wet it with lukewarm water, wringing it out thoroughly to remove excess moisture. 
  1. Gently wipe down the entire rubber sole with the damp cloth, focusing on areas with visible dirt accumulation.
  1. Clean the grooves and patterns of the tread using the edge or corner of the cloth. Be thorough, but gentle.
  1. Using a dry, lint-free cloth, buff the soles to remove any water streaks or residue. Let them air dry completely before moving on.

Soap and Water Mixture:

This approach is best for tougher dirt, scuff marks, or light oil-based stains. If the stains are significant or deep, consider a rubber sole cleaner.

  1. Prepare a mild soap solution by adding a few drops of dish soap or laundry detergent to a bowl of lukewarm water. Stir well to create a light lather.
  1. Dip the clean cloth into the soap solution, ensuring it’s not overloaded and dripping. Dab the stained areas gently, applying minimal pressure. Avoid scrubbing or soaking.
  1. Rinse the cloth frequently in clean water and repeat the dabbing process until the stain fades or disappears.
  1. Use a clean damp cloth to wipe away any soap residue, followed by a dry cloth for buffing and complete drying.

Additional Tips:

  • Do not use harsh chemicals or cleaners, as these can damage the sole.
  • Do not put the boots in the washing machine or dryer.
  • Stuff the boots with paper towels or shoe trees to help them maintain their shape while drying.
  • Allow the boots to air-dry completely before wearing them again. Don’t use heat sources like hairdryers, as this can damage the crepe sole.

How often should Clarks desert boot soles be cleaned?

The frequency of cleaning your Clarks desert boots depends on several factors, including:

Crepe sole: Requires less frequent cleaning due to its natural dirt-repellent properties. Aim for cleaning every 4-8 weeks, unless exposed to harsh conditions like rain, salt, or snow.

Rubber sole: Needs more regular cleaning as it picks up dirt and stains easier. Wipe them down with a damp cloth after every wear, and give them a deeper clean with soap and water or a rubber sole cleaner every 2-4 weeks.

  • If you wear your boots daily, especially for outdoor activities, cleaning them more frequently is necessary.
  • If you wear them less often, cleaning them every 2-3 months might suffice.
  • Rain, snow, and puddles can require immediate cleaning and waterproofing treatment to prevent stains and damage.
  • In dry weather, cleaning can be less frequent unless the boots come into contact with dirt or other substances.

By considering these factors and observing your boots’ condition, you can determine the optimal cleaning schedule for your Clarks desert boots. Remember, regular cleaning and proper care are crucial for maintaining their appearance and longevity.

Read Also: How to Make Boots Tighter Around the Calf ( 5 Methods )

Frequently Asked Questions

Q: Can I machine wash my desert boots?

No! Machine washing can damage the leather, sole, and overall shape of your boots. Always clean them by hand, using the appropriate methods for each material.

Q: How can I protect my soles from future stains?

Consider applying a waterproofing spray on both the leather and soles after cleaning. This helps repel water and dirt, making them easier to clean next time.


By exploring this comprehensive guide, we hope you’ve gained insights on how to clean the bottoms of Clarks desert boots. By following these steps regularly, you can ensure that your boots not only look great but also continue to provide the comfort and style that Clarks is known for. Remember, a little care goes a long way in keeping your favorite footwear in top-notch condition.

READ ALSO: How to Stretch UGG Boots ( 5 Best Methods )

Leave a Comment